Cub Crafters CC18-180 Maintenance Manual page 13

CUB CRAFTERS, INC.
CC18-180 MAINTENANCE MANUAL
00 INTRODUCTION
1 GENERAL
Cub Crafters, Inc.'s Technical Publications Department prepared this Aircraft Maintenance
Manual. It contains the information that a trained mechanic will need to maintain the CC18-180
in an airworthy condition.
The CC18-180 Aircraft Maintenance Manual was prepared using GAMA Specification #2
(Specification for Manufacturers Maintenance data), Revised September 1982 as a model.
However, this specification is intended to cover a very broad range of aircraft including very
complex ones. By comparison, the CC18-180 is a relatively simple aircraft, so the model given
in the GAMA Specification was altered for clarity, while at the same time preserving a format
that will be familiar to most modern aircraft mechanics.
This Maintenance Manual does not reflect part numbers and cannot be used for ordering
replacement parts.
The wiring schematics that have been included in the manual are for general information
purposes only. Aircraft will have optional equipment for which there will be specific drawings
that will either be included with the aircraft's documentation on delivery or be available from Cub
Crafters, Inc.
2 LAYOUT OF THE MANUAL
This Maintenance Manual is divided into chapters. The chapter numbers follow the numbering
system given in GAMA Specification #2, although in certain instances it has been adapted for
this manual. The chapter numbers appear at the foot of each page.
Each chapter contains its own table of contents. Where the systems are complex, the table of
contents will be found in the sub chapter (as is the case in Chapter 27).
00-00
Manual number TC10000AMM
Date: 12/29/14 Page: 1