Reverse this procedure to install the TouchPad board.
Battery
Description
Battery (3-cell, 36-WHr, 3.25-AHr, Li-ion; includes cable)
Before removing the battery, follow these steps:
1.
Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2.
Disconnect the power from the computer by unplugging the power cord from the computer.
3.
Disconnect all external devices from the computer.
4.
Remove the keyboard/top cover (see
Remove the battery:
1.
Remove the six Phillips PM1.9×4.2 screws (2) that secure the battery to the base enclosure.
2.
Remove the battery (2).
Reverse this procedure to install the battery.
Keyboard/top cover on page
Spare part number
767068-001
25).
Component replacement procedures
33