Table of Contents
Advertisement
b.
Remove the display bezel (4).
NOTE:
following image.
2.
To remove the webcam/microphone module:
a.
Position the display assembly with the top edge toward you.
b.
Disconnect the cable (1) from the module.
c.
Remove the webcam/microphone module (2). (The module is attached to the display enclosure
with double-sided tape.)
3.
To remove the display panel:
a.
Remove the four Phillips PM2.5×3.5 screws that secure the display panel to the enclosure.
80
Chapter 6 Removal and replacement procedures for Authorized Service Provider parts
In this procedure, the display will NOT be connected to the computer, as shown in the
Hide quick links:
Advertisement
Table of Contents
