Installing A Hard Drive - HP probook 430 G2 User Manual

8. Pull the plastic tab (3) to remove the hard drive from the bay.

Installing a hard drive

To install the hard drive:
1. Insert the hard drive into the hard drive bay (1).
2. Slide the hard drive (2) toward the center of the computer to engage it with the connector.
3. Tighten the 4 hard drive screws (3).
4. Replace the service door (see
5. Insert the battery (see
Replacing the service door on page
Inserting a battery on page
49).
41).
Using hard drives 51