Accu-Chek Compact User Manual page 20

Setting the Beeper, Year,
Time, and Date
34
1. If the meter is on, press
the TEST button to
turn it off. With the
meter turned off, press
the SET button.
2. Press the MEM button
to turn the beeper on
or off.
3. Press the SET button
again.
4. Press the MEM button
to change the year.
After the SET button is pressed,
the meter turns on without
advancing a test strip from the
test drum.
The meter is factory set with
the beeper turned on. We
recommend that you always
leave the beeper turned on.
The last two numbers of the year
field flash.
The meter scrolls upwards
through the year values. If you
hold the MEM button down, the
meter fast-scrolls to 2032 and
begins again at 2000.
35