Anynet+ (Hdmi-Cec) Isn't Working - Samsung SMART TV E-Manual

Anynet+ (HDMI-CEC) Isn't Working

The problem
Anynet+ does not work.
I want to start Anynet+.
I want to exit Anynet+.
The message "Connecting
to Anynet+ device..."
or "Disconnecting from
Anynet+ device" appears
on the screen.
The Anynet+ device
won't play.
The connected device is
not displayed.
The TV audio is not
being played through the
receiver.
Try this!
Confirm that the device is an Anynet+ device. The Anynet+ system supports Anynet+
devices only.
Check if the power cord of the Anynet+ device is properly connected.
Check the cable connections of the Anynet+ device.
Anynet+ (HDMI-CEC)
Go to
Anynet+ (HDMI-CEC)
see if
Check whether the TV remote control is in TV mode.
Check whether the remote control is Anynet+ compatible.
Anynet+ may not function when some other functions are active, including Channel
Search, Smart Hub, Plug & Play, etc.
If you have disconnected and then reconnected the HDMI cable, scan for devices again
or turn your TV off and on.
Check if the Anynet+ device is properly connected to the TV, and then select the
Anynet+ (HDMI-CEC)
Anynet+ (HDMI-CEC)
see if
View TV
Select from the Anynet+ menu.
Select a non-Anynet+ device from the
You cannot use the remote control when you are configuring Anynet+ or switching
to a viewing mode. Use the remote control after the TV has completed the Anynet+
configuration or has switched to a viewing mode.
You cannot use the play function when
Check whether the device supports Anynet+.
Check whether the HDMI cable is properly connected.
Anynet+ (HDMI-CEC)
Go to
Anynet+ (HDMI-CEC)
see if
Scan for Anynet+ devices again.
Anynet+ devices must be connected to the TV using an HDMI cable. Make sure the
device is connected to your TV with an HDMI cable. Some HDMI cables may not
support Anynet+.
If the connection is terminated because there has been a power failure or the HDMI
cable has been disconnected, please scan for the device again.
Connect an optical cable to the TV and the receiver.
ARC enables the TV to output digital sound via the HDMI (ARC) port.
However, ARC is only available when the TV is connected to an audio receiver that
supports ARC.
메뉴
(메뉴/123
has been set to On.
메뉴 System
(메뉴/123
is set to On.
Source
Setup
메뉴
(메뉴/123
has been set to On.
System Anynet+ (HDMI-CEC))and
Anynet+ (HDMI-CEC)) menu to
list.
is in progress.
System Anynet+ (HDMI-CEC))and