Chicago Electric 69480 Owner's Manual & Safety Instructions page 9

Installing Push Stick Brackets
1. Tilt saw on its side to access opening
underneath the Housing (12) of the saw.
Installing Plug Holder
1. With saw still on its side find mounting
hole for Plug Holder on Housing (12).
Secure the Plug Block (22) to Housing using the
ST4.2x14 Screws (4) and Ø4 Flat Washers (3).
ITEM 69480
Figure B
For technical questions, please call 1-888-866-5797.
2. Use ST4.2x14 Screws (4) and Ø4 Flat Washers (3)
to attach the Push Stick Clamps (13)
and Push Stick Blocks (14) to the side
of the Table Saw. See Figure B.
2. Install Plug Clamp (21) into Plug Block using
the M4x10 Bolt (19), Ø4 Spring Washer (20)
and Ø4 Flat Washer (3). See Figure C.
Figure c
Page 9