Kerberos Authentication Encryption Setting - Ricoh MP 6002 User Manual

Kerberos Authentication Encryption Setting

You can specify encrypted transmission between the machine and the key distribution center (KDC)
server when Kerberos authentication is enabled.
Using Kerberos authentication with Windows or LDAP authentication, LDAP search, etc., ensures safe
communication.
The supported encryption algorithm differs depending on the type of KDC server. Select the algorithm
that suits your environment.
KDC server
Windows Server 2003 Active Directory
Windows Server 2008
Windows Server 2008 R2
Heimdal
* To use Kerberos authentication, it must be enabled in the operating system settings.
1. Log in as the network administrator from Web Image Monitor.
2. Point to [Device Management], and then click [Configuration].
3. Click [Kerberos Authentication] under "Device Settings".
4. Select the encryption algorithm you want to enable.
One or more encryption algorithm must always be selected.
5. Click [OK].
6. Log out.
Kerberos Authentication Encryption Setting
Supported encryption algorithms
• RC4-HMAC (ARCFOUR-HMAC-MD5)
• AES256-CTS-HMAC-SHA1-96
• AES128-CTS-HMAC-SHA1-96
• RC4-HMAC (ARCFOUR-HMAC-MD5)
• AES256-CTS-HMAC-SHA1-96
• AES128-CTS-HMAC-SHA1-96
• RC4-HMAC (ARCFOUR-HMAC-MD5)
• AES256-CTS-HMAC-SHA1-96
• AES128-CTS-HMAC-SHA1-96
• DES3-CBC-SHA1
• RC4-HMAC (ARCFOUR-HMAC-MD5)
• DES-CBC-MD5
*
183