Specifying Checking Of The Certificate Valid Period - Ricoh MP 6002 User Manual

Hide thumbs Also See for MP 6002:

Table of Contents

5. Enhanced Network Security

Select the digest algorithm to be used in the electronic signature next to "Digest

Algorithm" under "Signature".

Select the method for attaching the electronic signature when sending e-mail from the

scanner next to "When Sending E-mail by Scanner" under "Signature".

Select the method for attaching the electronic signature when forwarding received fax

messages next to "When Transferring by Fax" under "Signature".

Select the method for attaching the electronic signature when sending e-mail from the fax

next to "When Sending E-mail by Fax" under "Signature".

Select the method for attaching the electronic signature when e-mail notification is sent

using the fax function next to "When E-mailing TX Results by Fax" under "Signature".

Select the method for attaching the electronic signature when forwarding stored

documents next to "When Transferring Files Stored in Document Server (Utility)" under

"Signature".

The settings for the S/MIME electronic signature are enabled.

• Configure the settings taking into consideration the encryption algorithm and digest algorithm

supported by the user's e-mail software.

Specifying Checking of the Certificate Valid Period

The validity period of the certificate used with S/MIME is verified when you send e-mail.

You can change the timing at which the valid period is checked.

Operation mode

Security Priority

The validity period is verified at the following timings.

User Certificate

(a). When the address is selected

(b). When the [Start] key is pressed

Device certificate

(c). When the first address is selected

(d). When the [Start] key is pressed

Table of Contents