Specifying Network Security Level; Specifying Network Security Level Using The Control Panel - Ricoh MP 6002 User Manual

Hide thumbs Also See for MP 6002:

Table of Contents

5. Enhanced Network Security

Specifying Network Security Level

This setting lets you change the security level to limit unauthorized access. You can make network

security level settings on the control panel, as well as Web Image Monitor. However, the protocols that

can be specified differ.

• With some utilities, communication or login may fail depending on the network security level.

Network Security Levels

Security Level

The network administrator logs in from the control panel.

Press [System Settings].

Press [Administrator Tools].

Press [ Next] twice.

Select [Level 0] to use all features. Use this setting when you have no

information that needs to be protected from external threats.

Select [Level 1] for moderate security to protect important information. Use

this setting if the machine is connected to a local area network (LAN).

Has a security strength intermediate between [Level 1] and [Level 2].

It only uses a password as recommended by the U.S. government as its

coding/authentication algorithm.

Settings other than the algorithm are the same as [Level 2].

Select [Level 2] for maximum security to protect confidential information. Use

this setting when it is necessary to protect information from external threats.

For configurations other than the levels above. Configure using Web Image

Table of Contents