Load Code Page Control - Ricoh MP 6002 User Manual

10. Loaded Font Command Set
Offset Range
8 Bit 0: 0/1
Bit 1: 0/1
Bit 2: 0/1
Bits 3-7
9-n

Load Code Page Control

This command describes a code page resource which will be used to carry code page data. The Load
Code Page Control (LCPC) command is followed by one or more Load Code Page (LCP) commands
that specify the code page data.
The LCPC command is valid only in Home State and causes a transition to Code Page State. Code Page
State ends when the printer receives the End command following receipt of at least one LCP command.
Offset Range
0-1 X'0001' -
X'7EFF'
2-3
Bits 0-3:
0000
Bits 4-7:
0001
Bits 4-7:
0010
Bits 8-15:
0000000
0
212
PROCESSING FLAGS
Defined/Undefined
Defined/Undefined
Incrementing/Nonincrementing Reserved
CODE POINT
CODE PAGE HOST ASSIGNED ID
ENCODING SCHEME
Reserved
Number of Bytes
Fixed Single-byte
Fixed Double-byte
Reserved
Meaning
Meaning
Error Code
X'02B0..0
7'
Error Code
X'02B0..0
0'
X'02B0..0
1'
X'02B0..0
2'