10. Loaded Font Command Set
Loaded Font Function Set Commands
Name
Load Code Page
Load Code Page
Control
Load Font
Load Font Character
Set Control
Load Font Control
Load Font Index
Load Code Page
This command assigns each code point of a code page to a specific Graphic Character Global ID
(GCGID). One or more Load Code Page (LCP) commands follow the Load Code Page Control
command.
A sequence of LCP commands are used to transmit the entire code page. This sequence is initiated by
the first LCP command that contains data and terminates with an End command. Entries may be split
across LCP commands on any byte boundary and are restricted in size by the standard IPDS 32767
byte command length limit.
Offset
Range
0-7
(8 Bytes)
Command
X'D61B'
X'D61A'
X'D62F'
X'D619'
X'D61F'
X'D60F'
GRAPHIC CHARACTER GLOBAL ID
Sub-command
Meaning
Where to Look
p.211 "Load Code
Page"
p.212 "Load Code
Page Control"
p.214 "Load Font"
p.216 "Load Font
Character Set Control"
p.217 "Load Font
Control"
p.222 "Load Font
Index"
Error Code
211