Xoh Set Media Origin - Ricoh MP 6002 User Manual

1. Device Control Command Set
• For the tray in which "envelope" has been specified as the paper type, the tray values of the tray ID
are (in ascending for each respective tray that is installed) as follows: X'8040', X'8041', etc. If a
different paper type is specified for the tray, the tray values of the tray ID are (in ascending for
each respective tray that is installed) as follows: X'8000', X'8001', etc. In regards to the bypass
tray and default tray, even if you specify "envelope" as the paper type, the tray value will not be
changed.
• To ascertain which machine type your model corresponds to, see "Machine Types", Read This First.
Offset Range
0-1 X'1500'
2
X'00'
X'01'
X'02'
X'03'
X'04'
X'63'
X'FF'

XOH Set Media Origin

The XOH Set Media Origin (SMO) command specifies the origin of the media.
This order takes effect on the next-received page. The media origin will not change until either another
XOH-SMO command is processed or the printer is reinitialized.
Offset Range
0-1 X'1600'
108
SELECT INPUT MEDIA SOURCE
INPUT MEDIA SOURCE
Tray 1
Tray 2
Tray 3
Large capacity tray (LCT)
Interposer
Bypass tray
Default tray
SET MEDIA ORIGIN
Meaning
Meaning
Error Code
X'02C8..0
1'
Error Code