Execute Order Any State (Xoa); Xoa Mark Form; Xoa Exception Handling Control - Ricoh MP 6002 User Manual

Hide thumbs Also See for MP 6002:

Table of Contents

Execute Order Any State (XOA)

This command identifies a set of subcommands which take effect immediately, regardless of the current

printer operating state.

Each Execute Order Any state command consists of a two-byte order code followed by zero or more

bytes of parameters.

The MF order causes the printer to place two rectangular blocks of job separation marks on the current

or the next sheet. One block is printed on the leading edge of the sheet and one block is printed on the

trailing edge of the sheet.

If the MF order is included in a page that is part of a Load Copy Control copy group (See p.28 "Load

Copy Control") all the copies of the page will have a job separator mark included.

The Exception-Handling Control command allows the host to control how the printer reports and

processes exceptions. A data-stream exception exists when the printer detects an invalid or unsupported

command, control, or parameter value.

EXCEPTION HANDLING CONTROL (EHC)

Execute Order Any State (XOA)

Table of Contents