Load Copy Control - Ricoh MP 6002 User Manual

1. Device Control Command Set

Load Copy Control

A copy control record 2 to 32760 bytes long specifies how the printer is to modify and print logical
pages in one or more copy subgroup definitions. Each copy subgroup definition can be from 2 to 254
bytes long (divisible by 2). The maximum number of key-words that the host program can specify in a
copy subgroup definition is:
• X'80nn' specify 1 time
• X'90nn' specify 1 time
• X'91nn' specify 1 time
• X'C1nn' specify 1 time
• X'C2nn' specify 1 time
• X'D1nn' specify 1 to 126 times
• X'E1nn' specify 1 to 126 times
• X'E4nn' specify 1 to 63 times
• X'E5nn' specify 1 to 63 times
• Actual tray capacity is determined by media weight.
• The machine supports media source tray numbering. Media source values in the LCC support
tables represent the default settings when the printer is initially installed. The printer's control panel
menu mode is provided to allow customers to specify the source tray numbers to meet requirements
of legacy applications. Example: customer might want to address the Manual Tray as tray 4
instead of the tray 100 (default).
• For the tray in which "envelope" has been specified as the paper type, the tray values of the tray ID
are (in ascending for each respective tray that is installed) as follows: X'8040', X'8041', etc. If a
different paper type is specified for the tray, the tray values of the tray ID are (in ascending for
each respective tray that is installed) as follows: X'8000', X'8001', etc. In regards to the bypass
tray and default tray, even if you specify "envelope" as the paper type, the tray value will not be
changed.
• To ascertain which machine type your model corresponds to, see "Machine Types", Read This First.
Offset Range
0 X'02' -
X'FE'
1 X'01' -
X'FF'
28
COPY SUBGROUP DEFINITION LENGTH
NUMBER OF IDENTICAL COPIES
Meaning Error Code
X'0231..0
1'