Specifying The Port When Installing The Lan-Fax Driver - Ricoh MP 6002 User Manual

4. Installing the Facsimile Driver
4. Click [LAN-Fax Driver].
5. The software license agreement appears in the [License Agreement] dialog box. After
reading the agreement, click [I accept the agreement.], and then click [Next].
6. Click [Next].
7. Double-click [Printer Name : <LAN-Fax M(number)>].
8. Click [Port:].
9. Select the same port as the one selected in the printer driver from the ['Change settings for
'Port'] drop-down list.
10. Click [Continue].
The installation starts.
11. Click [Finish].
Select one of the options to restart the computer either now or later, and then click [Finish].

Specifying the Port When Installing the LAN-FAX Driver

To specify a port that is different from the printer driver when installing the LAN-FAX driver, see the
installation procedure of the printer driver.
If places where the procedure or description differs depending on the driver to be installed, replace the
corresponding procedure or description accordingly, and install the driver.
p.15 "Using the Standard TCP/IP port"
p.15 "Using the IPP port"
p.17 "Using the LPR port"
p.18 "Using the WSD port"
p.20 "Using the SmartDeviceMonitor for Client port"
List of Items to Replace
No. Items to be replaced
The name of the button that
1 starts the installation
procedure
42
Installation procedures
Procedure/description in the
printer driver
Click [PCL Printer Drivers] or
[PostScript 3 Printer Driver].
Corresponding items to
replace
1, 2, 4
3
1, 2, 4
3
1, 2, 4
Procedure/description in the
LAN-Fax driver
Click [LAN-Fax Driver].