Other Messages - Ricoh MP 6002 User Manual

10. Troubleshooting

Other messages

This section describes likely causes of and possible solutions for the error messages that are printed on
the error logs or reports.
Message
"84: Error"
"85: Error"
"86: Error"
"91: Error"
"92: Error"
"98: Error"
"A function which cannot be
used with Fold mode was
set. The job has been
cancelled."
"Address Book is currently in
use by another function.
Authentication has failed."
190
Causes
There is no work area
available for image
processing.
The specified graphics
library is unavailable.
Parameters of the control
code are invalid.
Printing was canceled by the
auto job cancel function due
to a command error.
Printing was canceled
because [Job Reset] or the
[Stop] key was selected on
the machine's control panel.
The machine could not
access Hard disk correctly.
A print job was cancelled
because a function(s) not
available with Fold was
selected.
The machine currently
cannot perform
authentication because the
Address Book is being used
by another function.
Solutions
• In [Printer Features], under
[System], set [Memory Usage] to
[Font Priority].
• Decrease the number of files sent
to the machine.
• In [Printer Features], under
[System], set [Memory Usage] to
[Font Priority].
• Check that the data is valid.
Check the print settings.
Check that the data is valid.
Perform the print operation again if
necessary.
Turn off the main power switch, and
then back on again. If the message
appears frequently, contact your
service representative.
Cancel the function(s) not available
with Fold. For details about the
functions not available with Fold, see
"Fold", Print .
Wait a while, and then retry the
operation.