Billing Code; Fold - Ricoh MP 6002 User Manual

Hide thumbs Also See for MP 6002:

Table of Contents

% rsh nphost print filetype=postscript,resolution=600,bitsperdot=2 < file1

% rcp file1 nphost:filetype=postscript,resolution=600,bitsperdot=2

ftp> put file1 filetype=postscript,resolution=600,bitsperdot=2

• The value or actions that can be selected differ depending on the model you are using. For details

about available gradation quality, see the manual that comes with this machine.

Billing Code

Specify the billing code.

billingcode=Value of billingcode (0x09(<HT>), 0x20-0xFF (except 0x22))

*1 MAX 228 bytes = 255byte (Max number of characters allowed for each PJL command line on GW-PJL

source) - 27 bytes (number of characters for @PJL SET BILLINGCODE = ""<CR><LF>)

% rsh nphost print billingcode=0x09 < file1

% rcp file1 nphost: billingcode=0x09

ftp> put file1 billingcode=0x09

• Note that PJL syntax allows unlimited spaces (for example, more than one space can be placed

between "@PJL" and "SET," or before/after the "=" sign).

• Therefore, a password can be less than the maximum value (228 bytes).

• This also implies the maximum value (228 bytes) is secured as long as the normal syntax is used.

Select the folding position for the output.

• When using this option, the optional finisher unit is required.

fold=value of folding position

Specifying the Device Option

Table of Contents