Onda WiFi Extender User Manual page 92

ONDA WiFi EXTENDER
Enable LED off
mode
When you finish settings in this page, click 'Apply' button. You'll see the
following message:
If you still need to configure this wireless repeater, click 'CONTINUE'
button; if you want to save changes and make it work now, click 'APPLY'
button.
You'll be prompted to wait for 30 seconds before you can reconnect to
Web UI of this access point.
select a higher power level, since this may cause
some people to try to break into your wireless
network when you have a bad password or no
password.
You can enable or disable LED lights
Check 'Enable LED OFF' mode to setup LED
behavior:
Turn off all LED: disabled all LED lights
Turn off all LED except POWER LED: all LED
lights will be disabled, except 'POWER' LED
89