ONDA WiFi EXTENDER
4-1-2 Web browser quick setup
Before you can connect to the repeater and start configuration procedures,
your computer must be able to get an IP address automatically (use
dynamic IP address). If it's set to use static IP address, or you're unsure,
please refer to 'Chapter X: Appendix, 5-1 Configuring TCP/IP on PC' to
set your computer to use dynamic IP address.
(1)Use Ethernet cable to connect your computer's Ethernet port and
wireless repeater's Ethernet port.
Or use your computer's wireless configuration utility to search for access
point named 'repeater' and get connected. (The default SSID of this
repeater device is 'repeater')
(2)Open web browser and input 'http://repeater' in address bar. (or you
can input the default IP address '192.168.2.1')
73