Onda WiFi Extender User Manual page 75

ONDA WiFi EXTENDER
(3) If WPS connection is successfully established, 'WPS' LED will light
for 5 minutes; if 'WPS' LED flashes fast, there's something error, please
wait for 2 minutes until 'WPS' LED off, and try from step(1) again.
WPS LED
When quick installation is successfully done, 'Signal" LED will turn on.
Signal LED
(4) 'Signal' LED in AP mode is Steady light to provide wireless clients
the best signal.
(5) Connect this access point to ADSL modem, wired router, or
switch/hub in your network through the LAN port of the access point by
Ethernet cable.
The quick installation setup is completely done, you can refer to '4-2 AP
mode Advanced Settings' to login in web UI for other advanced settings.
72