Onda WiFi Extender User Manual page 64

ONDA WiFi EXTENDER
Item
Fragment Threshold Set the Fragment threshold of wireless radio.
RTS Threshold
Channel Width
WMM
TX Power
Enable LED off
mode
When you finish settings in this page, click 'Apply' button. You'll see the
following message:
Description
Threshold. Do not modify default value if you
don't know what it is, default value is 2346.
Set the RTS threshold of wireless radio. Do not
modify default value if you don't know what it is,
default value is 2347.
Select the wireless channel width, 20MHz or
40MHz. 40MHz provides better network speed
for 802.11n wireless clients.
Enable or disable Wireless Multi-Media. When
enabled, this device will give priority to
multimedia related network applications so they
will have better performance.
Select wireless transmitting power level, from
10% to 100%. When wireless clients are not too
far from this wireless repeater, you don't have to
select a higher power level, since this may cause
some people to try to break into your wireless
network when you have a bad password or no
password.
You can enable or disable LED lights
Check 'Enable LED OFF' mode to setup LED
behavior:
Turn off all LED: disabled all LED lights.
Turn off all LED except POWER LED: all LED
lights will be disabled, except 'POWER' LED.
61