Onda WiFi Extender User Manual page 62

ONDA WiFi EXTENDER
Passphrase Key
Config Mode
Start PBC
Start PIN
NOTE: For WPS2.0 compliance specification, WEP and WPA-PSK
can't support WPS connection, some of wireless devices may follow
this latest WPS2.0 specification, so we recommend you not to use
WEP and WPA-PSK to avoid WPS interoperability problem.
Here shows asterisks (*) to indicate wireless
security is properly set.
Client mode only supports 'Enrollee' mode, you
can input this client mode's PIN code to
AP/Router.
Click 'Start PBC' to start Push-Button style WPS
setup procedure. This wireless repeater device
will wait for WPS requests from another wireless
device for 2 minutes.
The 'WPS' LED on the wireless repeater will be
blinking for 2 minutes when this wireless repeater
is waiting for incoming WPS request.
Please click 'Start PIN' button and input this PIN
code to the wireless broadband router or Access
point you wish to connect.
The 'WPS' LED on the wireless repeater will be
blinking when this wireless repeater is waiting for
incoming WPS request.
59