Onda WiFi Extender User Manual page 43

Management IP
To set up the IP address of this wireless repeater, please see the following
description.
Item
IP Address
Subnet Mask
Gateway Address
When you finish settings in this page, click 'Apply' button. You'll see the
following message:
If you still need to configure this wireless repeater, click 'CONTINUE'
button; if you want to save changes and make it work now, click 'APPLY'
button. You'll be prompted to wait for 30 seconds before you can
reconnect to this wireless repeater.
Description
Input the IP address of LAN / Wi-Fi port of this
wireless repeater.
NOTE: Please remember this IP address. If you
forget this IP address and you didn't use DHCP
server function to assign IP address to clients,
you'll not be able to connect to this wireless
repeater and you'll need to clear all settings and
password to reset the IP address back to default
value '192.168.2.254'.( Press WPS button and
hold for 10 seconds to restore all settings to
factory defaults)
Input the subnet mask of the IP address you're
using.
Input the gateway's IP address of your network.
Generally you can use '0.0.0.0' (default value)
since this wireless repeater will access Internet
via WAN port.
40
ONDA WiFi EXTENDER