Onda WiFi Extender User Manual page 32

ONDA WiFi EXTENDER
N Data Rate
Channel Width
Preamble Type
Broadcast ESSID
WMM
CTS Protect
TX Power
establish connection with wireless clients by
other speed.
It's recommended to select 'Auto' and this
wireless repeater will adjust the speed
automatically.
Select wireless data transfer speed by MCS0 to
MCS7. MCS stands for Modulation and Coding
Scheme, which represents different speed when
bandwidth is 20MHz or 40MHz.
It's recommended to select 'Auto' and this
wireless repeater will adjust the speed
automatically.
Select the wireless channel width, 20MHz or
40MHz. 40MHz provides better network speed
for 802.11n wireless clients.
However, if there're 802.11b / g clients
connecting to this wireless repeater, it will switch
to 20MHz mode automatically.
Set the type of preamble of wireless radio, Do not
modify default value if you don't know what it is,
default setting is 'Short Preamble'.
When set to 'enabled', every wireless devices can
scan and found this wireless repeater; when set to
'disabled', only wireless clients who know exact
SSID can get connected with this wireless
repeater. Set to disabled will help to improve
security.
Enable or disable Wireless Multi-Media. When
enabled, wireless repeater will give priority to
multimedia related network applications so they
will have better performance.
This function provides CTS (Clear to Send)
protection when transferring data. It's
recommended to select 'Auto' for this option.
Select wireless transmitting power level, from
10% to 100%. When wireless clients are not too
29