Onda WiFi Extender User Manual page 29

Authentication
Mode
Passphrase Key
Config Mode
Start PBC
Start PIN
NOTE: For WPS2.0 compliance specification, WEP and WPA-PSK
can't support WPS connection, some of wireless devices may follow
this latest WPS2.0 specification, so we recommend you not to use
WEP and WPA-PSK to avoid WPS interoperability problem.
Shows the authentication mode of this wireless
repeater.
Here shows asterisks (*) to indicate wireless
security is properly set.
There are 'Registrar' and 'Enrollee' modes for the
WPS connection. When 'Registrar' is enabled,
the wireless clients will follow the repeater's
wireless settings for WPS connection. When
'Enrollee' mode is enabled, the repeater will
follow the wireless settings of wireless router for
WPS connection.
Click 'Start PBC' to start Push-Button style WPS
setup procedure. This wireless repeater will wait
for WPS requests from another wireless device
for 2 minutes.
The 'WPS' LED on the wireless repeater will be
blinking for 2 minutes when this wireless repeater
is waiting for incoming WPS request.
Please input the PIN code of the wireless client
you wish to connect, and click 'Start PIN' button.
The 'WPS' LED on the wireless repeater will be
blinking when this wireless repeater is waiting for
incoming WPS request.
26
ONDA WiFi EXTENDER