Onda WiFi Extender User Manual page 103

Management IP
To set up the IP address of this wireless repeater, please see the following
description.
Item
IP Address
Subnet Mask
Gateway Address
DHCP Server
This wireless access point is capable to act as a DHCP server for your
network, and it's disabled by default. If you want to activate this function,
please select 'Enabled' in 'DHCP Server' option, and see next detailed
instructions; if you don't want to use DHCP server function of this
wireless access point, or there's another DHCP server on the network this
access point connects to, please select 'Disable'.
NOTE: If you select 'Disable' in 'DHCP Server' option, all
DHCP-related fields will be grayed out, and you will not be able to
input any DHCP parameter.
Description
Input the IP address of LAN / Wi-Fi port of this
access point.
NOTE: Please remember this IP address. If you
forget this IP address and you didn't use DHCP
server function to assign IP address to clients,
you'll not be able to connect to this device and
you'll need to clear all settings and password to
reset the IP address back to default value
'192.168.2.1'.( Press WPS button and hold for 10
seconds to restore all settings to factory defaults)
Input the subnet mask of the IP address you're
using.
Input the gateway's IP address of your network.
Generally you can use '0.0.0.0' (default value)
since this wireless repeater will access Internet
via WAN port.
100
ONDA WiFi EXTENDER