Web Interface Login - Algo 8188 Installation/Configuration Manual

the blue LED begins a double flash pattern. Release the reset
button and allow the unit to complete its boot process. Do not
press the reset button until the blue LED begins flashing.
A reset will set all configuration options to factory default including
the password.
Once booting has completed, pressing the reset button will cause
the speaker to annunciate its IP address over the speaker.

Web Interface Login

The web interface requires a password which is "algo" by default.
This password can be changed using the Admin tab after logging in
the first time.
Document 90-00067 A
2014-09-12
Page 16
Algo Communication Products Ltd
4500 Beedie St Burnaby BC Canada V5J 5L2
www.algosolutions.com
(604) 454-3792
support@algosolutions.com