Table of Contents
Advertisement
Quick Links
Owner's Manual & Safety Instructions
Save This Manual
inspection, maintenance and cleaning procedures. Write the product's serial number in the back of the manual
near the assembly diagram (or month and year of purchase if product has no number). Keep this manual and
the receipt in a safe and dry place for future reference.
Blade Sold Separately
Email our technical support at: productsupport@harborfreight.com
REV 14g
When unpacking, make sure that the product is intact
and undamaged. If any parts are missing or broken,
please call 1‑888‑866‑5797 as soon as possible.
©
Copyright
2011 by Harbor Freight Tools
No portion of this manual or any artwork contained herein may be reproduced in
any shape or form without the express written consent of Harbor Freight Tools.
Diagrams within this manual may not be drawn proportionally. Due to continuing
improvements, actual product may differ slightly from the product described herein.
Tools required for assembly and service may not be included.
Keep this manual for the safety warnings and precautions, assembly, operating,
Visit our website at: http://www.harborfreight.com
®
. All rights reserved.
Read this material before using this product.
Failure to do so can result in serious injury.
SAVE THIS MANUAL.
Advertisement
Table of Contents
Related Manuals for Chicago Electric 69078
Summary of Contents for Chicago Electric 69078
- Page 1 Owner’s Manual & Safety Instructions Save This Manual Keep this manual for the safety warnings and precautions, assembly, operating, inspection, maintenance and cleaning procedures. Write the product’s serial number in the back of the manual near the assembly diagram (or month and year of purchase if product has no number). Keep this manual and the receipt in a safe and dry place for future reference.
-
Page 2: Table Of Contents
2. Do not operate power tools in explosive atmospheres, such as in the presence of flammable liquids, gases or dust. Power tools create sparks which may ignite the dust or fumes. Page 2 For technical questions, please call 1-888-866-5797. Item 69078... -
Page 3: Electrical Safety
A wrench or a key left attached to a rotating part of the power tool may result in personal injury. Item 69078 For technical questions, please call 1-888-866-5797. Page 3... -
Page 4: Power Tool Use And Care
Service Have your power tool serviced by a qualified repair person using only identical replacement parts. This will ensure that the safety of the power tool is maintained. Page 4 For technical questions, please call 1-888-866-5797. Item 69078... -
Page 5: Circular Saw Safety Warnings
For all other sawing, the lower guard should operate automatically. Item 69078 For technical questions, please call 1-888-866-5797. Page 5... - Page 6 Holding the work by hand or against your body is unstable and may lead to loss of control. Page 6 For technical questions, please call 1-888-866-5797. Item 69078...
-
Page 7: Vibration Safety
If any abnormal seek medical advice as soon as possible. vibration occurs, stop use immediately. SAVE THESE INSTRUCTIONS. Item 69078 For technical questions, please call 1-888-866-5797. Page 7... - Page 8 Association, and the National Electrical Code. 2. Double insulated tools may be used in either of the 120 volt outlets shown in the preceding illustration. (See Outlets for 2-Prong Plug.) Outlets for 2-Prong Plug Page 8 For technical questions, please call 1-888-866-5797. Item 69078...
-
Page 9: Extension Cords
Do not cover ventilation ducts. Keep flammable objects away. Amperes WARNING marking concerning Risk of Electric Shock. Properly connect power cord n 0 xxxx/min. No Load Revolutions per Minute (RPM) to appropriate outlet. Item 69078 For technical questions, please call 1-888-866-5797. Page 9... -
Page 10: Specifications
Laser Switch (82) Lower Guard Lever Laser (83) Angle Lock Knob (71) Saw Blade (Sold separately) Fence Lock Knob (69) Outer Flange (32) Base (64) Blade Bolt (31) Figure 1 Page 10 For technical questions, please call 1-888-866-5797. Item 69078... -
Page 11: Operation
Main until it is the desired distance from the Blade. Bar of Fence guide of Fence Fence Lock 3. Tighten in place with the Fence Lock Knob. Knob Figure 5 Item 69078 For technical questions, please call 1-888-866-5797. Page 11... -
Page 12: Dust Collector
7. Allow the Saw Blade to reach full speed before feeding the Saw Blade into the workpiece. 12. To prevent accidents, unplug the Power Cord from its electrical outlet. Clean, then store the tool indoors out of children’s reach. Page 12 For technical questions, please call 1-888-866-5797. Item 69078... -
Page 13: Maintenance
See Extension Cords section on page 9. Follow all safety precautions whenever diagnosing or servicing the tool. Disconnect power supply before service. Item 69078 For technical questions, please call 1-888-866-5797. Page 13... -
Page 14: Parts List And Diagram
Note: If product has no serial number, record month and year of purchase instead. Note: Some parts are listed and shown for illustration purposes only, and are not available individually as replacement parts. Page 14 For technical questions, please call 1-888-866-5797. Item 69078... -
Page 15: Assembly Diagram
Assembly Diagram Item 69078 For technical questions, please call 1-888-866-5797. Page 15... -
Page 16: Warranty
Limited 90 Day Warranty Harbor Freight Tools Co. makes every effort to assure that its products meet high quality and durability standards, and warrants to the original purchaser that this product is free from defects in materials and workmanship for the period of 90 days from the date of purchase.