HP Compaq nx6115 Maintenance And Service Manual page 131

2. Slide the tip of the processor socket release arm toward the
display 1 until it clears the notch 2 on the processor socket.
3. Swing the processor socket release arm to the left 3 as far as
it will go.
4. Lift the processor straight up and remove it 4.
✎
The gold triangle 5 on the processor should be aligned in the
front right corner when you install the processor.
Removing the Processor
Reverse the above procedure to install the processor.
Maintenance and Service Guide
Removal and Replacement Procedures
6–31