Burn Pot And Burn Grate: - Louisiana Grills 420 Owner's Manual

Installation: . . .
Step 3 Installing the Igniter :
•
Carefully remove the igniter from within the hopper to the inside of
the cooking barrel
•
Using your 1/4" nut driver and the 2 (two) remaining
#10 x 16 x 1/2" Dritap screws, secure the Igniter
to the inside of the barrel. Diagram F
Step 4 Complete attaching the hopper to the barrel:
•
Using your 5/16" nut driver and the 2 (two) larger
1/4" x 20—1/2" Hex screws , finish securing
the hopper to the inside of the barrel.
Diagram F
POSITIONING THE BURN POT AND BURN GRATE:
The placement of the burn pot and burn grate is VITAL to a happy cooking
experience.
•
Remove any debris from the bottom of the barrel.
•
Install the Burn Pot (1), ensuring that the notched portion is
pushed tight, into the hopper and against the side wall of
the grill ( A). The pot will hook to the barrel end. (B)
Install the enclose 5/16" x 12 x 2" self tapping screw , through the
Bottom slot of the burn pot (C) and into the bottom of the barrel.
This ensures a tight fit, with no movement of the pot.
DO NOT OVERTIGHTEN.
•
Install the Burn Grate (2).
The larger lip of the grate installs under the pellet drop chute. The end of
the igniter should be exposed behind the slot in the bottom side of grate.
(F)
The grate should be a snug fit. (D) and (E)
D
Assembly Instructions
Con't
F
E
E
F
B
A
A
C