Replace The Bottom Cover (See Replacing The Bottom Cover - HP Laptop User Manual

b. Grasp the edge of the memory module (2), and gently pull the module out of the memory
module slot.
To protect a memory module after removal, place it in an electrostatic-safe container.
7. Insert a new memory module:
CAUTION:
only. Do not touch the components on the memory module, and do not bend the memory
module.
a. Align the notched edge (1) of the memory module with the tab in the memory module slot.
b. With the memory module at a 45-degree angle from the surface of the memory module
compartment, press the module (2) into the memory module slot until it is seated.
c. Gently press the memory module (3) down, applying pressure to both the left and right
edges of the memory module, until the retention clips snap into place.
8. Replace the bottom cover. (Refer to
9. Replace the battery. (Refer to
70 Chapter 9 Memory modules
To prevent damage to the memory module, hold the memory module by the edges
Inserting or removing the battery on page
Removing or replacing the bottom cover on page 46.)
39.)