Related Manuals for NetComm NP126
Summary of Contents for NetComm NP126
- Page 1 QUICK START GUIDE NetCommWirele N600 Dual Band WiFi Extender NetCommWireless NP126...
-
Page 2: Package Contents
DEVICE OVERVIEW Front panel The NP126 features 7 LEDs on the front panel and a WPS button. The top 5 LEDs give an indication of the distance and strength of the signal between the NP126 and the connected router. The signal strength LEDs only functions when the device is in repeater mode. The images below describe the meaning of each indicator and button. -
Page 3: Bottom Panel
NP126 and the other end to the Ethernet port of your computer. Ensure the NP126 power switch is in the ‘off’ position and then plug the NP126 into a power outlet which is close to your computer and the router to which it will connect. - Page 4 CONNECTING THE NP126 TO YOUR ROUTER Using the web user interface Upon logging in to the NP126 web interface, you are presented with the Connection Wizard. Click the Start button at the bottom of the screen to begin connecting the WiFi Extender to your broadband hub/router.
- Page 5 Slide the power switch to the ‘off’ position and remove the NP126 from the wall socket. Plug the NP126 into a wall socket in the centre of the area that you would like to cover which is also within range of the router. Turn the power switch to the ‘on’ position. Wait approximately 30 seconds for the NP126 to power up and connect to the router.
- Page 6 WPS button. Refer to the documentation for your wireless client device if you can’t find the WPS button. On the NP126, press and hold the WPS button for 1 to 2 seconds. The WPS LED blinks to indicate that the WPS function has been triggered. When the connection has been established using WPS, the WPS LED stops flashing.