Processor - HP Compaq Business Notebook nc8000 Maintenance And Service Manual

Removal and Replacement Procedures

5.13 Processor

Processors (include grease)
Intel Pentium M processor, 1.7 GHz
Intel Pentium M processor, 1.6 GHz
Intel Pentium M processor, 1.4 GHz
1. Prepare the notebook for disassembly (Section 5.3).
2. Release the keyboard (Section 5.8).
3. Remove the heat sink (Section 5.12).
4. Use a flat-bladed screwdriver to turn the processor locking
screw one-quarter turn counterclockwise 1.
5. Remove the processor from the system board socket 2.
✎
Note that the gold triangle 3 on the processor should be aligned
in the front left corner when you install the processor.
Removing the Processor
Reverse the above procedure to install the processor.
5–26
Spare Part Number Information
Maintenance and Service Guide
340165-001
319777-001
319775-001