Summary of Contents for Ricoh BOOK FOLDER BF90+
-
Page 1: Operating Instruction
BOOK FOLDER BF90+ Operating instruction Read this manual carefully before you use this product and keep it handy for future reference. For safety, please follow the instructions in this manual. - Page 2 Part no: 17439 Doc no: x04065...
-
Page 3: Table Of Contents
TABLE OF CONTENTS What You Can Do with This Machine ................5 Guide To Components ...................... 7 Exterior ............................7 Interior ............................8 1. Basics ....................9 Turning On / Off the Main Power ..................9 Emptying the trim bin ...................... 10 2. - Page 4 Page intentionally blank...
-
Page 5: What You Can Do With This Machine
What You Can Do with This Machine TR90+ Trimmer CF90 Cover Feeder (option) (option) BF90+ Book Folder (option) SR90+ Booklet Maker Rail (option) The Book Folder BF90+ is an option to the SR90+ Booklet Making system. The Booklet Making system works online with the Bellini C2a/b, Martini and Bellini C1a/b. To install the Book Folder BF90+ you need to have a TR90+ Trimmer installed to the SR90+ Booklet Maker. - Page 6 The Book Folder BF90+ is controlled from the single user interface on the Booklet Maker. This Operator Manual will only cover the specific functions of the Book Folder BF90+. From the Ready screen, scroll down to BF90+ with the arrow button and press [CHG] button. Changing settings.
-
Page 7: Guide To Components
Guide To Components Exterior Top cover Belt stacker interlock Belt stacker, upper part Belt stacker Connections Trim bin Base Stacker COM BF90 Terminator POW BF90... -
Page 8: Interior
Interior Top view, Upper feed belts in lifted up Lower feed belts Upper feed belts... -
Page 9: Basics
1. Basics Turning On / Off the Main Power Plug the power cord (1) into the Book Folder. Set ON/OFF switch (2) on Book Folder to ON position. To avoid an Error message, turn ON the BF90+ before switching ON the SR90+. -
Page 10: Emptying The Trim Bin
Basics Emptying the trim bin Remove the trim bin by pulling it out. trim bin... -
Page 11: Operating The Book Folder
2. Operating the Book Folder Changing settings General The Book Folder has five different settings. It can be set to [Auto], [Mode 1], [Mode 2], [Mode 3] or [Off]. In [Auto] mode, the Booklet maker detects how may sheets there are in the booklet, and automatically set the Book folder to the correct mode. -
Page 12: Begin On-Line Production
Making Booklets Begin On-line Production Make sure that the [staple icon] is present on the copier control panel. If not, turn the Copier, Booklet Maker and Book Folder OFF. First turn the Book Folder ON, then turn the Booklet Maker ON and last Copier ON. Make sure that the booklet maker is set to auto paper size. -
Page 13: Clearing Misfeed(S)
3. Clearing Misfeed(s) Clearing misfeed(s) General If a misfeed condition should occur, it is indicated on the Booklet Maker display. The message “Clear Misfeed(s)”, an error code and the location of the misfeed is displayed. Misfeeds in the Book Folder are indicated as area E and by the error code BF-XXX. - Page 14 Page intentionally blank...
-
Page 15: Troubleshooting
4. Troubleshooting Fault codes General When there is a misfeed or fault condition in the Book Folder, a message will be displayed on the Booklet Maker user interface. In case there is a problem that can be rectified by the operator, a fault code and an explanation will be displayed. -
Page 16: Feed Errors
Troubleshooting Feed errors If feed errors occur, the feed belts needs to be cleaned or the pressure on the upper feed belts needs to be increased. To clean the feed belts, see section 5, REMARKS Maintaining Your Machine. To increase the pressure on the upper feed belts follow this procedure. Open the top cover. -
Page 17: Remarks
5. REMARKS Do’s And Don’ts • Always follow all warnings marked on, or supplied with, the equipment. • Always exercise care in moving or relocating the equipment. CAUTION: • Unplug the powercord from the wall outlet and machine before you move or relocate the equipment. -
Page 18: Where To Put Your Machine
REMARKS Where to put Your Machine Machine environment • Always locate the equipment on a solid support surface with adequate strength for the weight of the machine. • Always keep magnets and all devices with strong magnetic fields away from the machine. -
Page 19: Access To Machine
Where to put Your Machine Access to machine Place the machine near the power source, providing clearance as shown. 1. Left: more than 400 mm / 15 3/4”. 2. Front: more than 555 mm / 21 7/8” 3. Right: more than 400 mm / 15 3/4” (off-line use). -
Page 20: Maintaining Your Machine
REMARKS Maintaining Your Machine Never attempt any maintenance function that is not specifically described in this documentation. Cleaning feed belts The Feed belts need to be cleaned regularly when in use, and if the unit has not been used for a period of time. -
Page 21: Specification
6. Specification Machine Specifications Book Folder BF90+ (option) Specifications Remarks Speed (Online usage) 2 A4/8.5x11” sheets from the copier 800 books/h Maintain engine speed of SR90+ 2 A3/11x17” sheets from the copier 500 books/h Maintain engine speed of SR90+ Maximum Speed 50 booklets / Min (A4), 33 / Min (A3) (Off line usage) Standard Paper Sizes... - Page 22 Page intentionally blank...
-
Page 23: Index
INDEX Table of Contents 3 Access to machine 19 Trim bin, emptying 10 Troubleshooting 15 Turning On / Off the Main Power 9 Basics 9 Begin On-line Production 12 What You Can Do with This Machine 5 Where to put Your Machine 18 Changing settings 11 Cleaning feed belts 20 Clear Misfeed(s) 15...