Connect To Existing Network; Extender Settings - TP-Link AC750 User Manual

4.4.1 Connect To Existing Network

Selecting Wireless > Connect To Existing Network will guide you to set the basic parameters to
get a connection to the internet (show in Figure 4-10).
Click the Next button to continue, for detailed steps, please refer to
Guide .
Click the Exit button to quit.

4.4.2 Extender Settings

Selecting Wireless > Extender Settings will enable you to configure the basic settings for your
wireless network on the screen below (Figure 4-11)
Region - Select your region from the drop-down list. This field specifies the region where the
wireless function of this device can be used. It may be illegal to use the wireless function of
this device in a region while you chose a different region in the drop-down list. If your country
or region is not listed, please contact your local government agency for assistance.
WiFi Network Name (2.4GHz or 5GHz)- The Range Extender's wireless network name
(SSID) which your PC or other device can be connected to.
Channel - The current wireless channel in use.
Click Save to save the changes.
RE200
Figure 4-10 Connect to Existing Network
Figure 4-11 Extender Settings
19
AC750 WiFi Range Extender User Guide
Chapter 3 Quick Installation