System Components - Accu-Chek Inform II Operator's Manual

Introduction

System components

24
The ACCU-CHEK Inform II system includes the following
components and accessories:
A Meter
B Code key reader
A
C Base unit with power supply
D Accessory box (not included)
B
The system can be configured by two different methods:
1 Configuration via the Setup function on the meter
(see Chapter 9)
2 Configuration via data management system
Note: Not all options can be configured using the Setup
function on the meter.
C
The meter performs the following tasks within the system:
Serves as the primary operator interface through
n
the touchscreen and on/off button
Performs glucose tests
n
Scans barcodes (test strip lots, controls, patient
n
and operator IDs) in a variety of supported formats
Displays test results from patient tests and control
n
tests
Transfers stored data to the data management
n
system via wireless communication (WLAN,
optional) or the ACCU-CHEK Inform II Base Unit
(LAN)
D