Applying A Blood Sample - Accu-Chek Inform II Operator's Manual

Applying a blood sample

Patient Test 12:48 pm
Patient 123456789
Strip Lot 545794
09/18/13
Once the meter has checked the test strip, the hourglass
icon disappears and you are prompted to apply a blood
sample.
1 Wait until the flashing drop appears in the display
before applying the blood. The meter beeps.
2 Apply the drop of blood to the front edge (yellow
dosing area) of the test strip. Blood is pulled into
the test strip by capillary action.
Do not apply the blood to the top of the strip. Blood
on top of the test strip is not available for testing
because it will not be pulled into the strip.
Once a sufficient blood sample has been detected,
the meter beeps and the measurement begins.
Patient Glucose Testing
47