Inserting Test Strips - Accu-Chek Inform II Operator's Manual

Patient Glucose Testing

Inserting test strips

Patient Test 12:48 pm
Patient 123456789
Strip Lot 545794
09/18/13
Patient Test 12:48 pm
Patient 123456789
Strip Lot 545794
09/18/13
46
After confirming the test strip lot, a flashing green arrow
appears on screen and prompts you to insert the test
strip.
1 Remove the test strip from the test strip vial and
close the vial with the cap.
2 Hold the test strip so the lettering "ACCU-CHEK" is
facing upward.
3 Slide the test strip into the test strip port as far as it
goes in the direction indicated by the arrows on the
test strip. The meter beeps.
The meter beeps. The hourglass icon appears and
indicates that the meter is checking the test strip.
Do not apply blood while it is displayed.