E-Mail Parameters - Ricoh D158 Service Manual

Dedicated Transmission Parameters
ECM during transmission
Bit 7: 0, Bit 6: 0 = Off
6-7 Bit 7: 0, Bit 6: 1 = On
Bit 7: 1, Bit 6: 0 = Not used
Bit 7: 1, Bit 6: 1 = Disabled
Switch 04 - Not used (do not change the settings)
Switch 05 - Not used (do not change the settings)
Switch 06 - Not used (do not change the settings)
Switch 07 - Not used (do not change the settings)
Switch 08 - Not used (do not change the settings)
Switch 09 - Not used (do not change the settings)

E-mail Parameters

The initial settings of the following e-mail parameters are all "0" (all parameters disabled).
Switch 00
No FUNCTION
MH Compression mode
for e-mail attachments
0
0: Off
1: On
MR Compression mode
for e-mail attachments
1
0: Off
1: On
MMR Compression
mode for e-mail
2 attachments
0: Off
1: On
3-6 Not used
D702
For example, if ECM is switched on but is not
wanted when sending to a particular terminal, use
the (0, 0) setting.

V.8/V.34 protocol and JBIG compression
are automatically disabled if ECM is
disabled.

If the setting is "Disabled", the bit switch
setting is used.
COMMENTS
Switches MH compression on and off for files
attached to e-mails for sending.
Switches MR compression on and off for files
attached to e-mails for sending.
Switches MMR compression on and off for files
attached to e-mails for sending.
Do not change these settings.
126 SM