Counter Interface Unit
2.12 COUNTER INTERFACE UNIT
2.12.1 COMPONENT CHECK
Check the quantity and condition of the components against the following list.
No.
1
Key Counter Interface Board
2
Stud Stay
3
Wire Harness (For parallel)
4
Wire Harness (For serial)
2.12.2 INSTALLATION PROCEDURE
Unplug the machine power cord before starting the following procedure.
1. Rear cover (
p.4-4)
2. Right rear cover (
3. Cut off the part [A] of the right rear cover for the device cable.
4. Connect the accessory harness to the counter interface board (
D158/D159/D160/D161/D170
Description
p.4-13)
2-64
Q'ty
1
4
1
1
x 1).
SM