Printer Switches - Ricoh D158 Service Manual

Lanier, ricoh, savin
Table of Contents

Advertisement

Bit Switches - 2

4.4.2 PRINTER SWITCHES

No
Function
Select page separation marks
0
0: Off
1: On
Repetition of data when the
received page is longer than
1
the printer paper
0: Off
1: On
Prints the date and time on
received fax messages
2
0: Disabled
1: Enabled
D702
Printer Switch 00 (SP No. 1-103-001)
0: If a 2 page RX transmission is split, [*] is
printed in the bottom right corner of the 1st page
and only a [2] is printed in the upper right corner
of the 2nd page.
1: If a 2 page RX transmission is split into two
pages, for example, [*] [2] is printed in the
bottom right corner of the 1st page and only a [2]
is printed in the upper right corner of the 2nd
page.
1: Default. 10 mm of the trailing edge of the
previous page are repeated at the top of the next
page.
0: The next page continues from where the
previous page stopped without any repeated
text.
This switch is only effective when user
parameter 02 - bit 2 (printing the received date
and time on received fax messages) is enabled.
1: The machine prints the received and printed
date and time at the bottom of each received
page.
Comments
This helps the user to identify pages
that have been split because the size of
the paper is smaller than the size of the
document received. (When A5 is used
to print an A4 size document, for
example.)
78
SM

Advertisement

Table of Contents
loading

Table of Contents