Cannot Receive By Alias Fax Number - Ricoh D158 Service Manual

IP-Fax Troubleshooting

Cannot receive by Alias Fax number.

Check Point
1 LAN cable connected?
2 Firewall/NAT is installed?
Gatekeeper/SIP server installed
3
correctly?
Power to Gatekeeper/SIP server
4
switched on?
IP address/host name of
5 Gatekeeper/SIP server correct on the
sender's side?
DNS server registered when
6 Gatekeeper/SIP server host name
specified on sender's side?
Enable H.323/Enable SIP SW is set to
7
on?
8 Local fax IP address registered?
9 Local fax Alias number registered?
10 Network bandwidth too narrow?
D702
Action
Check the LAN cable connection.
Cannot the breach firewall. Request the
remote fax to send by using another
method (Fax, Internet Fax)
Contact the network administrator.

The sender machine displays this
error code when the sender fax is
a Ricoh model.
Contact the network administrator.

The sender machine displays this
error code when the sender fax is
a Ricoh model.
Request the sender to check the IP
address/host name.

The sender machine displays this
error code when the sender fax is
a Ricoh model.
Contact the network administrator.

The sender machine displays this
error code when the sender fax is
a Ricoh model.
Request the sender to check the settings.
User Parameter SW 34 Bit 0/SW 34 Bit 1

Only if the remote sender fax is a
Ricoh fax.
Register the IP address.
Register the Alias number.
Request the system administrator to
increase the bandwidth.
48 SM