Rev. 3/31/2014
2.9.2 INSTALLATION PROCEDURE
Unplug the copier power cord before starting the following procedure.
⇒
Before installation, see Technical Service Bulletin D158/D159/D160/D161/D170 – 001
REROUTE HARNESS BEFORE INSTALLING THE 1-BIN TRAY (BN2010).
1.
Strip all tapes on the 1-bin tray unit off.
2.
Rear cover [A] (
3.
Inverter tray [A] (hook).
4.
Inner cover [A] (
Keep the two screws that you removed in this step. Use them to attach the accessory
inner cover (step 9).
D158/D159/D160/D161/D170
x 9)
x 2)
2-39
One-Bin Tray Installation
SM