2.6.2 INSTALLATION PROCEDURE
Unplug the copier power cord before starting the following procedure.
1. All tapes and shipping retainers.
2. Insert the two stud screws [A] [B].
3. Mount the ARDF [A] by aligning the screw keyholes [B] of the ARDF support plate over the
stud screws.
4. Slide the ARDF toward the front of the machine.
5. Secure the ARDF with the two knob screws [C].
6. Align the rear left corner of the platen sheet [A] with the corner [B] on the exposure glass.
7. Close the ARDF.
8. Open the ARDF and check that the platen sheet is correctly attached.
D158/D159/D160/D161/D170
ARDF Installation (for D160/D161/D170)
2-25
SM