Updating Procedure - Ricoh D158 Service Manual

Updating Procedure

1. Turn the main power switch off.
2. Remove the slot cover [A] (
3. Insert the SD card into SD Card Slot 2 [B]. Make sure the label on the SD card faces the front
side of the machine.
4. Slowly push the SD card into the slot so it locks in place. You will hear it click. Make sure the
SD card locks in place.

To remove the SD, push it in to unlock the spring lock. Then release it so it pops out
of the slot.
5. Disconnect the network cable if the machine is connected to a network.
6. Switch the main power switch on. After about 45 seconds, the initial version update screen
appears on the LCD in English.
7. On the screen, touch the button or press the corresponding number key on the operation
panel to select the item in the menu that you want to update.
D158/D159/D160/D161/D170
x 1).
6-3
Firmware Update
SM