Ardf Image Adjustment - Ricoh D158 Service Manual

4.14.3 ARDF IMAGE ADJUSTMENT

A: Leading edge registration
B: Side-to-side registration

Make a temporary test chart as shown above, using A3/11" x 17" paper.
1. Place the temporary test chart on the ARDF and make a copy from one of the feed stations.
2. Check the registrations, and adjust as necessary with the appropriate SP modes, as follows.
ADF Adjustment - Side to Side Registration
ADF Adjustment - Leading Registration
ADF Adjustment - Magnification
ADF Adjustment - Side to Side Registration: Front
ADF Adjustment - Side to Side Registration: Rear
ADF Adjustment - Leading Edge Registration
DF Magnification Adjustment
D158/D159/D160/D161/D170
Copy Adjustments Printing/Scanning
SP mode
SP6-006-001 (D160/D161/D170)
SP6-006-002 (D160/D161/D170)
SP6-006-005 (D160/D161/D170)
SP6-006-001 (D158/D159)
SP6-006-002 (D158/D159)
SP6-006-003 (D158/D159)
SP6-017-001 (D158/D159)
4-111 SM