Sd Card Appli Move; Overview; Move Exec - Ricoh D158 Service Manual

Lanier, ricoh, savin
Table of Contents

Advertisement

Controller Options

2.15.2 SD CARD APPLI MOVE

Overview

The service program "SD Card Appli Move" (SP5-873) lets you move application programs from
one SD card to another SD card.
If more than one application is required, the applications must be moved to one SD card with
SP5-873-001 (Security Application, PictBridge, etc.).
Be very careful when you do the SD Card Appli Move procedure:
The data necessary for authentication is transferred with the application program from an SD
card to another SD card. Authentication fails if you try to use the SD card after you move the
application program from one card to another card.
Do not use the SD card if it has been used before for other purposes. Normal operation is not
guaranteed when such an SD card is used.
Keep the SD card in the place after you copy the application program from one card to
another card. This is done for the following reasons:
The SD card can be the only proof that the user is licensed to use the application
program.
You may need to check the SD card and its data to solve a problem in the future.

Move Exec

The menu "Move Exec" (SP5-873-001) lets you move application programs from the original SD
card to another SD card.
Do not turn ON the write protect switch of the system SD card or application SD card on
the machine. If the write protect switch is ON, a download error (e.g. Error Code 44)
occurs during a firmware upgrade or application merge.
1. Turn the main switch off.
2. Make sure that a target SD card is in SD Card Slot 1 (upper). The application program is
moved to this SD card.
3. Insert the source SD card with the application program in SD Card Slot 2 (lower).The
application program is copied from this source SD card.
4. Turn the main switch on.
5. Start the SP mode.
6. Select SP5-873-001 "Move Exec".
7. Follow the messages shown on the operation panel.
8. Turn the main switch off.
9. Remove the source SD card from SD Card Slot 2 (lower).
10. Turn the main switch on.
D158/D159/D160/D161/D170
2-78
SM

Advertisement

Table of Contents
loading

Table of Contents