Data Overwrite Security - Ricoh D158 Service Manual

2.14.3 DATA OVERWRITE SECURITY

Do the following procedure if a customer wants to use this function.
1. Do SP5-878-1(Option Setup - Data Overwrite Security) and touch [EXECUTE].
2. Go out of the SP mode, turn off the operation switch, then turn off the main power switch.
3. Turn the machine power on.
4. Press [User Tools] and select System Setting > Administrator Tools > Auto Erase Memory
Setting > On
5. Exit from User Tools mode.
6. Check the display and make sure that the overwrite erase icon [A] is displayed.
7. Make a Sample Copy.
8. Check the overwrite erase icon.

The icon [B] changes to [C] when job data is stored in the hard disk.

The icon goes back to its usual shape [B] after this function has completed a data
overwrite operation to the hard disk.
9. Do SP5990-005 (SP print mode - Diagnostic Report).
10. Look at the report:

Under "[ROM No./Firmware Version]" check the number and version number listed for
"HDD Format Option".

Under "[Loading Program]" check the option number and version number listed for
"GW_zoffy".

These two version numbers should be identical.
11. Exit SP mode.
D158/D159/D160/D161/D170
Hard Disk Drive Option (D158/D159 only)
2-75 SM