Getting Started Guide - Accu-Chek Mobile ® 1. Starting to use the Accu-Chek Mobile system Mobile kim_manual_0280 kim_manual_0090 kim_manual_0240 Mobile Accu-Chek ® Open the tip cover completely as far Push the slide button upwards. This Remove a new test cassette...
Page 4
Getting Started Guide - Accu-Chek Mobile Getting Started Guide - Accu-Chek Mobile ® ® kim_manual_0410 kim_manual_0430 2. Preparing the lancing device 4. Loading a new lancet kim_manual_0440 Red line Used lancet drum lancet drum Push the lever at the side of the finger...
If the error message is still displayed after turning the meter on again, please your customer support and service centre Contact the Accu-Chek Enquiry Line on 1800 251 816. If your meter has been dropped, that can also lead to error messages. In this case, you...
Insert two new batteries. Repeat the test. If the error message is displayed after turning the meter on again: Contact the Accu-Chek Enquiry Line on 1800 251 816. Move to a place where the www.accu-chek.com.au ambient temperature is at least +10 °C and wait for the...
Getting Started Guide - Accu-Chek Performa Getting Started Guide - Accu-Chek Performa ® ® 1. Insert the Code Chip 2. Adjust the Time and Date – First Time Use 3. Perform a Blood Glucose Test 1-3. decrease increase Press and release to decrease or Make sure the meter is off.
If the control result is not it. Perform a blood glucose or control test. Accu-Chek Enquiry Line: 1800 251 816 within the acceptable range, see Chapter 4 If the problem persists, call Roche. “Understanding Out-of-Range Control Test Results,”...
Getting Started Guide - Accu-Chek Performa nano Getting Started Guide - Accu-Chek Performa ® ® 1. Insert the Code Chip 2. Adjust the Time and Date – First Time Use 3. Perform a Blood Glucose Test 1-3. Yellow Release Button...
If the problem persists, call Roche. Accu-Chek Enquiry Line: 1800 251 816 see Chapter 4, “Understanding Out-of- Range Control Test Results.” if the error message continues, please call roche...
Page 11
Getting Started Guide - Accu-Chek Active Getting Started Guide - Accu-Chek Active ® ® removing the protective Coding film from the battery This Quick Reference Guide does not replace the detailed Instructions for use for your Accu-Chek Active blood glucose meter.
Page 12
The code chip does not belong to the Accu-Chek Active test strips. error message appears again, the flashed in the display. Remove the code chip and insert the code chip that belongs to the Accu-Chek Active test meter is defective. Please contact your Repeat the test with a new test strip.
Getting Started Guide - Accu-Chek Multiclix ® Lancing Systems Accu-Chek Lancing System ® 3 simple steps to teach and learn PRESS to prime CLICK to prick TWIST & BACK for next lancet Used drum NO lancet handling www.accu-chek.com.au Accu-Chek Enquiry Line: 1800 251 816...
Getting Started Guide - Accu-Chek Multiclix Getting Started Guide - Accu-Chek Multiclix ® ® Load drum Set penetration depth 3 simple steps to teach and learn Step 1A Press Step 2 Click Remove cap. Insert new drum with blue ring end first.
Getting Started Guide - Accu-Chek Softclix Getting Started Guide - Accu-Chek Softclix ® ® The classic lancing system using single lancets offers easy, well-established handling. Getting started Selecting penetration depth Obtaining a blood sample 3 simple steps to teach and learn...
® ® 5 tips for gentle blood sampling. Lancing correctly with Accu-Chek lancing devices keeps discomfort to a minimum. You can test more comfortably with these five easy steps: If you need assistance in the set up of your new meter, please call us on Ensure hands are clean and dry.